location_pin Get Directions
883275 Hwy 65 East New Liskeard, ON P0J 1P0

Welcome to Ebert Welding LTD.

Ebert Welding LTD. is an authorized dealer for New Holland Agricultural, Salford Group, Gerber Gravity Bins, Farm-Fleet and Cub Cadet. We are also the Sur-Trac Snowmobile Trail Grooming Equipment and Trail Bridge manufacturer. Eberts' is proud to have talented fabricators and welders who are able to design, create or fix whatever it may be to suit your needs, with the help of a fully equiped shop.

Located in New Liskeard, Ontario, we serve Northeastern Ontario and Northwestern Quebec. Ebert Welding LTD. has a complete parts department and service department, including, a mobile service truck. Our mission is to serve the agricultural, trail grooming, mining and machining industries throughout the Northern Ontario-Quebec corridor. ​We are proud to support and sell brands such as Walco, HLA/Horst, SKF, NTN, KML, Hercules, Conventa, Canadian Farm Supply, Amcan, and so on.​​​​

Ebert Welding LTD. would be more then happy to help You to meet your needs, no matter what the industry may be.


ID # 19201483

Salford Valmar 5500 Pull-Type

Call for Price


Achieve Superior Accuracy and Uniform Placement Over Entire Width of Boom

Stainless Steel Booms
Designed for commercial rental operations, Salford Valmar’s 5500 pull-type self-leveling booms feature extra-strong, all stainless steel construction with breakaway boom tips for added protection. The standard unit comes with a 40-foot boom. Booms fold manually.

Valmar 5500 Pull-Type
Sale Type

1000 RPM PTO Fan Drive
The 5500 PT fan is driven by a 1000 RPM power take-off system. The constant velocity drive shaft is 1 3/8 inches in diameter, 21 spline, and is equipped with an over-running clutch to prevent damage from sudden disengagement of the tractor PTO system. An optional 1 3/4-inch 20-spline shaft is available.

Ground Driven Metering System
A hydraulically engaged metering system provides consistent application rates regardless of ground speed. Either side can be manually disengaged for half-width application. 

Extremely Accurate Metering Gearbox
The mechanical gearbox uses 60 different gear ratios for metering rates at five percent increments. Rates as low as four pounds per acre for herbicide application and as high as 400 pounds of fertilizer per acre at 5 miles per hour. A bulk density scale is supplied to help match your fertilizer blend to the application rate charts.

Apply Herbicides or Small Seeds
With an optional kit, the 5500 PT can accurately apply small seeds or herbicide at low rates, something that is not possible with a spinner-type spreader. The kit consists of two 28-groove metering rollers and a fan intake reducer.

Optional Marking Systems
Select from a mechanical disc marker or a Simpson SKS foam marker.

Roll Tarp Installed
Hopper screen kit keeps foreign material out.

Hydraulic Fan Drive
Salford Valmar also offers an optional hydraulic fan drive. This option uses a belt drive with a 32 CC hydraulic motor, requiring 23 gallons per minute hydraulic flow when operating at 1885 PSI – well within the capability of many of today’s higher capacity tractors.

Single-Axle Option
Features a single axle with 12-ply, 550/60-22.5 flotation tires at 90 inches center to center, avoiding the skidding associated with tandem axles when turning.

  • Tandem walking beam

  • Adjustable axle width with available tires: 16.5L x 16.1 (81-99 inches) or 9.00 x 20 (72-90 inches)

  • 2 ½-inch axles with six bolt hubs

  • 20-inch impeller with dual outlets

  • PTO fan drive

  • 1000 RPM CV driveline, 13⁄8 inch – 21T spline

  • Optional hydraulic fan drive

  • Requires 23 GPM operating at 1885 PSI • ¾ inch hydraulic lines

  • ¾ inch hydraulic lines

  • Case drain required

  • 40 application width - 304 stainless steel construction

  • Self-leveling boom with break away boom tips

  • 2.5 inch diameter tubes with 6 deflectors per side

  • Manual fold

airflo 5500 hopper features
  • 167 cubic feet

  • 409 stainless steel, painted

  • Hopper bottom shut-off slide panels

  • Roll tarp installed

  • Requires one remote to engage metering system

  • Requires second remote for optional hydraulic boom fold

  • Requires additional remotes for optional hydraulic drives for fan and/or metering

dimensions/shipping information
  • Height: 8 ft. 6 in.

  • Width: 8 ft. 6 in. (9 ft. 2 in. with single axle)

  • Length: 17 ft. 3 in.

  • Weight: 4360 lb.

single axle
  • 550/60-22.5 tires/12-ply at 90 inches center to center

  • Tire Dimensions – width 550 mm (21.7 in.)/OD – 1238 mm (48.7 in.)

  • 2 ¾-inch axles with eight bolt hubs



Used Equipment