3 POINT MOUNT OR PULL-TYPE

Standard Category 1, or 2 three-point hitch (depending on size) for basic sports turf and fairway aeration.

Working widths of 45 inches, 60 inches, 75 inches or 90 inches.

Designed for use with tractors or utility vehicles. Pneumatic turf tires make transport convenient.

Working widths of 45 inches, 60 inches, 75 inches or 90 inches.

SHATTERINES

Low-cost, low-maintenance, and long-lasting option for your turf needs. Fractures tough soil, enhances air, water, and nutrient movement, and promotes stronger root systems and healthier top growth of plants.

CORING TINES

Ideal for dethatching, topdressing, and overseeding preparation on fairways and sports fields with a 3/4” diameter and 4” length. It can be used at high speeds and is available in 4”, 5”, and 6” centers to fit a variety of AerWay frames.

A heavy-duty, 6-inch venting aeration tine that can be easily fitted to any AerWay frame. A fast, effective, and economical 6-inch venting aeration tine for sports fields, fairways, tees, and approaches that can be used mid-season.

FINE TINE

A reliable solution for relieving surface compaction and penetrating up to 6 inches on greens, tees, approaches, and fine turf. When combined with the “Greens Express” smoothing roller on most AerWay frames, you can aerate up to 18 greens in just three hours.

SUPER FINE TINE

A thatch management tool that maintains infiltration rates between verticality and coring treatments for greens, tees, approaches, and fine turf on 3” x 3” centers. Plus, when used with the smoothing roller, it’s a fast and non-disruptive solution for your turf maintenance needs.
 

TINE ADJUSTMENT

On certain AerWay® models, the user has the ability to offset the rollers of the Shattertine equipped units for renovation purposes. This can be accomplished by changing two bolts on the outboard end of each roller. The manual unit has three positions of offset, 0, 2 1/2 and 5 degrees.

GREENS ROLLER

The AerWay Greens Express smoothing roller option allows the operator to lift the roller completely off the ground to leave the aeration holes open, or adjust tine penetration in less than one inch increments, or support the tined roller completely out of the ground for use exclusively as a smoothing roller.