New Holland TH Series Telehandlers - TH9.35 PLUS

Your productivity won’t be limited in restricted spaces and tough conditions thanks to the hydraulic power, maneuverability, and traction on the TH Series. Efficient hydraulics are key to telehandler productivity and that goes beyond pump capacity. Effective use of oil, optimal ram sizes, and control valves all contribute to overall performance. Careful attention to the design of the hydraulic circuit ensures fast cycle times and performance in demanding conditions, including extreme heat. Up to two optional front auxiliary hydraulic outlets, complete with valves and diverters, to control front-mounted attachments can be specified. Additional rear auxiliary lines are also available.

All models are equipped with a high-performance, variable-displacement piston pump with a maximum output of 36.9 gpm (140 lpm). High flow rates are available at all engine speeds, but hydraulics also close down when there is no demand on the system to allow more engine power to divert to the transmission. This is especially valuable in transport or when climbing a steep slope.

Maneuverability is key, especially when navigating around tight barnyards, but the TH Series is big on staying nimble. When four-wheel steering mode is engaged, you’ll enjoy a turning radius of just 12.8 feet (3.9 m). Crab steer mode lets you move a load in or out of an area in a diagonal direction to easily maneuver around fenceposts or immovable objects. Front-wheel steering works well for general use and transport applications, letting you drive just like a tractor. Auto wheel alignment is standard on all models to realign the wheels when switching between all-wheel, crab, and front steering.

You’ll switch attachments over quickly and easily without returning to the cab by pressing the auxiliary pressure-release button located above the front fender.

Designed for longevity and high transport speeds, sealed wet disc brakes are used on both axles. The parking brake (Spring Applied Hydraulic Release—SAHR—System) is activated via a dash-mounted switch.

All models come standard with full-time 4WD and a front limited-slip differential. The TH7.42 ELITE comes standard with a front and rear limited-slip differential, which directs up to 45% of available torque across the axle to ensure the wheel with the most traction gets power.

460/70 R24 tires are standard and ideal for general-purpose applications and yard work. To enhance flotation, 500/70 R24 tires are optional. Ground clearance at the lowest point under the axles is more than enough for your daily chores or when working over rough terrain.