MANUAL ADJUST ROLLERS

The AWM allows for angle adjustment of the tine rollers allowing the operator to increase or decrease tillage intensity as they see fit. The manual bolt adjustment system is capable of being set to 0°, 2.5°, or 5°. Using 4 rollers per tine on 7.5 in. spacing, the AWM is a fit for a wide range of tillage and soil conservation goals.

THREE-POINT OR PULL-TYPE

The AerWay AWM features three standard width configurations: 6.25 ft., 7.5 ft. and 10 ft. Each of these widths is available in a three-point or pull-type model configuration.

The AWMP (Pull-Type) features two, 9.5 in. X 15 in. – 8 ply ribbed agricultural tire mounted to a six bolt hub and can be lowered/raised using a 3 in. bore x 12 in. stroke double acting cylinder system with manual lockout.

OPTIONAL BALLAST BLOCKS

For tough ground conditions or fields that have not been aerated in the past, additional weight may be necessary to achieve desired penetration depth. The AerWay C-Flex allows for use of concrete ballast blocks which can be placed in the machine’s integrated weight trays when needed. Each machine allows for a combination of 550 lbs. and/or 750 lbs. blocks depending on the width of the machine.

CHAIN HARROWS OPTION

AerWay chain harrows can be added to the AWM aerator allowing for incorporation of a wide range of inputs including manure, litter, fertilizer, herbicide, and seed. The harrows use 5/8 in. steel and features 3 in. teeth angled at 45° on one side for lighter harrowing or when working in heavier trash. The opposite side of the harrow uses 3 in. teeth angled at 15° for more rigid harrowing action. The unique tooth arrangement of the harrow is self-cleaning under most conditions.